Pages

Wednesday, February 15, 2012

Blogging at work - now also in english.

Thank you all for the response on the last post - we have now decided at the museum that the blog is also being written i english. The more the merrier!




So we hope that you will follow our project...

Tuesday, February 14, 2012

Blogging at work

I am fortunate to have a work were I work with living history. I work at a small viking village which lay in the buttom af the large Ringkøbing Fjord in the western part of Jutland. The village is called Bork Viking Habour and have been an active museum since 2000. We have araound 45.000 guest during our season wich goes from 1. of April til the end of October. During the year we have many different activities and in Juli and August have many turist who visit our museum.

To see more pictures go to our Facebooksite or go the museums webpage for more info

I have been working there for 2 years now. We have been expanding a lot the last couple of years - new exhibition on brigdebuilding and water mills and a new wooden church. In Denmark we have archealogical finds from th 10 century of wooden churches and the great rune stone in Jelling tells us that King Harald Bluetoth made the danes christen around the year 960. 
This year we have finished a new Haithabu house. They are based on the great finds from Haithabu and we have had both volunteers and crafts men to work on the houses. 
The plan is to build two of this type of houses which we can offer to vikings in the summer time and for school classes during May, June and September. The house was startet i april 2010 and eventhough we still need to do some small things it is almost done. And that brings me to the center of why I wanted to make this post.

At the moment we have a archealology student living in the house - for 10 weeks. This projekt is part of here master thesis where she will write about living conditions in vikinge age houses and focus on light, smoke and such. It is a great project and along th 10 weeks there will be 27 different people living with here in the house. In the picture below you can se the first tema before they move in to the house. 
We are very excited at Bork to have such a research done on our new house and have therefor made a blog so that you can follow Jannie and the house online. 
The project is called "Mennesket og huset" and so is the blog. At the moment the texts is only in danish but I´m considering to make the english as well is a lot of foreign readers starts following the blog. So please let me know if you want an english text. 

/Louise

Sunday, February 12, 2012

Bollock dagger - Vol. 2

A couple of months ago I finished a bollock dagger for a friend of mine.
I dont have a lot to say about it, but it is based on the same type of handle as the last one I made. If you want to know more you can take a look at the post i wrote about the other one.

The handle is made from beech burl, with a brass plate on the top. The blade is was made by Tod.



Sunday, February 5, 2012

Crossbow quiver - Pt.1

For the last couple of weeks I have been working on a project for at friend og mine: A quiver for crossbow bolts.
I have been thinking about doing one of these for ages, so when I was aksed if I wanted to make one, I was very exited.

The shape and design of these quivers have always facinated me. But I had been struggleing with finding propper sources to base the item on. Luckily my friend had an article published in the "Journal of the Society of Archer-Antiquaries", wich explained the construction of a german quiver from around 1480, wich is now part of the collection of the "Stibbert Museum" in Florence (http://www.museostibbert.it/).
The article is titeled "A Quiver for Crossbow Bolts", and written by Alessio Cenni.

I read the article, looked at some period illustrations of quivers and some pictures of original quivers from the late 15th/ early 16th century. Then made some sketches and discussed the design with my friend. We arrived at something that we both liked and the I got to work.

The quiver that I am makeing is not a reproduction og the quiver discussed in the article by Alessio, but a model wich is seen in al lot of period illustrations.
This type is partly covered in fur and tied to the waist of the user with a belt.

Detail from "The martyrdom of St. Sebastian", Oberbayern, 1475.
Picture from Wikipedia
This first post will be about the wooden parts of the quiver. In future posts i will be writeing about the fur and leather covering as well as the suspension holes and some neat bone fittings.

Making a paper template will help getting the shape and dimensions right.
Alessio writes in his article that the german quiver is probably made from lime (Tilia sp.) or poplar (Populus sp.) wood. He describes it as a light weight wood without porous rings and suggests the two species. These species are not only light weight, but are also really easy to carve.

I bought a board of lime wood, 7,5cm thick (That is 3" , for our american readers)

The quiver is basicly made from 3 pieces of wood. A thin (6mm/ 3/16") board for the back and bottom, and a thick piece for the concave front.
Be sure to plane the backside og the front piece before you start shaping and hollowing, because you need an even surface for laying out the rabbet that holdt the back. This is done after the hollowing is done.

I started by roughly shapeing the outside with an axe and a bandknife.


The inside is shaped by holloving the thick front board. I used gouges for this, but if you have an adze, I will recommend using that. The final thickness of the front piece should be no more than 6-8 mm (3/16"-4/16"), but leave it a bit thick at the mouth, so there is wood enough to carve the lips at the top.

Tools (Left to right): Chip carving knife, mora-knife no. 106,
 small wooden spokeshave, backswept gouge, v-tool,  spoon-bent gouge.
After hollowing the front I started carwing the lip at the mouth of the quiver. I used a couple of different gouges for this, but my chip carving knife and mora-knife also came in handy. I also remembered that i had a backswept gouge for carving convex shapes and ended up using i quite a lot for this part of the project.

The outside shape was refined with a small spokeshave and a scraper. Lastly i sawed out the mouth with a coping saw. 

The lips are slightly undercut.
An important thing about the lips is that they have to be big enough to still be plainly visible when covered with leather. So make sure you make them a bit larger than you think nessecery.  

The good thing is that you don't have to worry too much about the final finisk of the survace. The toolmarks will be covered and evened out by even a very thin piece of leather. The lover part can be even more rough as it vill be covered in fur.

Rabbet
Here you can see the rabbet wich the back board is slotted in to. The three pieces are glued and pegged togeather. I used 3mm pegs made from some dry birch that I had. 


One of the pictures of surviving quiverse that my friend showed me, had a small hatch on the back. We thought that it might be for inserting bolts into the quiver without the risk of damaging the feathers. But after making a similar hatch on this quiver I can safely say that this i not the case. The hatch on my quiver is actually a bit larger than tha one on the original, but it is still to small to allow room enough for a bolt. The bolt will be jammed between the bottom and the front, before it can be fully inserted.

But the hatch seems to be a neat feature none the less... Just have to figure out what it's for :-)


The bottom is also joined to the front and back with a rabbet, glued and pegged.


The plates of the hinges will be covered by leather, so I thought that I would just show it off before it gets covered. I am quite pleased with it.
Its made from brass plate and riveted to the back, using cast brass nails, that have been cut to length.


Hope you enjoy the reading. Feel free to comment.
I am really looking forward to doing the covering, and it is nice to be writeing again :-)